Cudy SM100GSA-20 network transceiver module Fiber optic 1250 Mbit/s SFP 1310 nm
1.25Gb/s SFP, 1310nm FP, SM, 20km, 12.5dB
This product has been added to 2 people'scarts.
- Delivered by tomorrow (order Mon-Fri Delivery times 07:00 - 17:00) *T&C's Apply
- Including shipping costs on orders over R1500
- Major Cities: 2 to 5 working days
Outlying areas: 5-9 working days
- 7 days to change your mind and free returns *T&C's Apply
- Excellent customer service
Description
(SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit Ethernet and 1000BASE-T standard as specified in IEEE Std 802.3. The 1000BASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features. The 1000BASE-T uses the SFP’s RX_LOS pin for link indication. If pull up SFP’s TX_DISABLE pin, PHY IC be reset.
+3.3V Volt Electrical Power Interface
The SFP-1000BASE-T/SFP-1000BASE-T-SGMII has an input voltage range of 3.3 V +/- 5%. The 4V maximum voltage is not allowed for continuous operation.
Low-Speed Signals
MOD_DEF(1) (SCL) and MOD_DEF(2) (SDA), are open drain CMOS signals (see section VII, “Serial Communication Protocol”). Both MOD_DEF(1) and MOD_DEF(2) must be pulled up to host_Vcc.
Additional information
| SFP transceiver type | Fiber optic |
|---|---|
| Brand | Cudy |
| Maximum data transfer rate | 1250 Mbit/s |
| Interface type | SFP+ |
| Product colour | Stainless steel |
| Maximum transfer distance | 20000 m |
| Wavelength | 1310 nm |
| Operating temperature (T-T) | -40 – 70 °C |
| Storage temperature (T-T) | -40 – 85 °C |
| Width | 13.7 mm |
| Depth | 68 mm |
| Height | 13.8 mm |
| Fiber optic connector | SFP |
| Input voltage | 3.3 V |
| Quantity per pack | 1 pc(s) |
| Maximum voltage | 4 V |
| Form factor | SFP |
| Minimum operating temperature | -40 °C |
| Maximum operating temperature | 70 °C |
Only logged in customers who have purchased this product may leave a review.
Related products
Recently viewed items
Reviews
There are no reviews yet.